# Deploying Dremio using rook ceph

**URL:** <https://community.dremio.com/t/deploying-dremio-using-rook-ceph/4957>\
**Category:** Uncategorized\
**Created:** [January 29, 2020, 8:43am UTC](https://community.dremio.com/t/deploying-dremio-using-rook-ceph/4957 "2020-01-29T08:43:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ScottB](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@ScottB](https://community.dremio.com/u/ScottB)\
**Post date:** [January 29, 2020, 8:43am UTC](https://community.dremio.com/t/deploying-dremio-using-rook-ceph/4957/1 "2020-01-29T08:43:51Z")

</div>

Hi guys has anyone used rook and ceph as persistant storage?

I am new to both and trying to see how I can reconfigure the helm chart to create and use a pvc in ceph

I have changed the storage class to rook-ceph-block and tried various configuration changes to the values.yaml file with no joy so far.

any pointers would be appreciated

---

<div class="post-metadata">

**Author:** ![ScottB](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@ScottB](https://community.dremio.com/u/ScottB)\
**Post date:** [January 30, 2020, 8:53am UTC](https://community.dremio.com/t/deploying-dremio-using-rook-ceph/4957/2 "2020-01-30T08:53:28Z")

</div>

Ok discovered if you manually create the pvc’s with the same names as the helm chart it deploys ok, still a bit new to all the k8s stuff, will see if i can get it to work inside the helm chart.